![[:en]UNIQCHEM[:zh]website2[:]](https://www.uniqchem.com/wp-content/uploads/2019/04/cropped-Uniqchem-logo-final-no-background-2-2-e1675623758898.png){kind=logo}
中文17.03.2021 – UNIQ®SPERSE P-141
UNIQ®SPERSE P-141 – Wetting and dispersing additive for filled unsaturated polyesters
UNIQ®SPERSE P-141 is a monofunctional, deflocculating wetting and dispersing additive for mineral-filled, aminepreaccelerated polyester putty compounds as well as epoxy, acrylic, and polyurethane resins. It improves the wetting and dispersing speed of fillers during dispersion and reduces viscosity to enable an increased filler content to be achieved. It is suitable for all filled PUR systems. Due to its OH functionality, P-141 is incorporated in the polymer matrix and is therefore suitable for PUR systems in which fogging and emissions are critical (e.g., automotive applications, PU adhesives etc.).
UNIQ®SPERSE P-141 is especially recommended for the PU adhesives and sealants, epoxy electronic sealants, epoxy pouring applications and car putty to disperse the fillers(e.g. CaCO3, ATH or micro-silica) in the aminepreaccelerated polyester resins, solvent free epoxy resins or PU resins. It helps to maintain the good flow appearance and excellent storage ability.
14.02.2021 – UNIQ®SPERSE P-115
UNIQ®SPERSE P-115 – Wetting and dispersing additive for filled unsaturated polyesters
UNIQ®SPERSE P-115 is a wetting and dispersing additive for filled unsaturated polyester and epoxy systems for dispersing fillers like calcium carbonate, ATH and micro silica powder. Strong viscosities reduction so higher pigment and filler loading in the grinding process can be achieved. In BMC the UNIQ®SPERSE P-115 is used as viscosity stabilizer and give good anti-sedimentation performance.
21.01.2021 – UNIQ®SPERSE 716 S
UNIQ®SPERSE 716S – Dispersant for solvent based inorganic pigments
UNIQ®SPERSE 716S is a wetting and dispersing additive for solvent based coating systems. The dispersant is especially suitable for inorganic pigments, extender pigments and fillers. For TiO2 millbase viscosities will be strong reduced so higher pigment loading in the mill base process can be achieved.
18.12.2020 – UNIQ®SPERSE P-905
UNIQ®SPERSE P-905 – Pyrogenic silica rheological effectiveness additive
UNIQ®SPERSE P-905 is used as a thixotropic-reinforcing additive in unsaturated polyester resins, vinyl-resins epoxy and polyurethane systems that already contain pyrogenic silica or organophilic phyllosilicates (organoclays) as rheology additives. The additive reinforces the three-dimensional network structure of the silica or phyllosilicates through additional bridges, thereby enhancing the thixotropy. For this reason, it achieves sufficiently high anti-sagging properties with improved leveling and air release properties, even with low quantities of silica or phyllosilicates. When the additive is used in the pigmented formulations, it can improve the anti-flooding and floating performance.
24.11.2020 – UNIQ®SPERSE P-193
UNIQ®SPERSE P-193 – Polymeric wetting and dispersing additive
UNIQ®SPERSE P-193 is a wetting and dispersing additive for filled unsaturated polyester and epoxy resins to reduce the viscosity and prevent settling. Strong viscosities reduction so higher pigment and filler loading in the grinding process can be achieved.
UNIQ®SPERSE P-193 is especially recommended for the SMC composites, epoxy electronic sealant and epoxy pouring applications to disperse the fillers in the UPE resin or epoxy resins. It helps to maintain the good flow appearance and excellent storage ability.
16.11.2020 – UNIQ®FLOW 383S
UNIQ®FLOW 383S – modified polyester leveling agent
UNIQ®FLOW 383S is modified polyester leveling agents to be used in solvent based coating system. Shows excellent compatibility with most of the resins. It shows fast leveling combined with strong defoaming performances, it will improve DOI and shows a great fullness, it doesn’t influence the surface energy and therefore doesn’t cause interlayer adhesion problems and it is VOC free. Due to VOC free it meets environmental friendly requirements.
11.09.2020 – UNIQ®FOAM P-571
UNIQ®FOAM P-571 – Silicone free defoamer for solvent-based and solvent-free applications
UNIQ®FOAM P-571 is a strong silicone free polymer based anti-foam and air-release agent for solvent-based and solvent free applications, for plastic systems (ambient-curing and pultrusion applications), adhesives and sealants. E specially suitable for systems based on unsaturated polyesters, epoxies, PVC plastisols and acrylic resin systems. The additive furthermore helps to improve the leveling.
The defoamers is very fast in defoaming and gives excellent micro-foam and macro-foam destroying properties in very thick layers. Due to non silicone based it is very broad applicable for multiple applications.
UNIQ®FOAM P-571 is a strong silicone free polymer based anti-foam and air-release agent for solvent-based and solvent free applications, for plastic systems (ambient-curing and pultrusion applications), adhesives and sealants. E specially suitable for systems based on unsaturated polyesters, epoxies, PVC plastisols and acrylic resin systems. The additive furthermore helps to improve the leveling.
The defoamers is very fast in defoaming and gives excellent micro-foam and macro-foam destroying properties in very thick layers. Due to non silicone based it is very broad applicable for multiple applications.
10.12.2019 – UNIQ®SPERSE 670 U
UNIQ®SPERSE 670U – Structured Polymer dispersant.
UNIQ®SPERSE 670 U is a new chemistry developed dispersing agents is suited for solvent-, water-based, UV and solvent-free coating system. The dispersant is very well suited for grinding transparent iron oxides and also difficult pigments like eg PR177 to achieve very high transparency and color development. Also the dispersant is excellent suited for dispersing matting agents in water-based and solvent free systems like in UV to give excellent viscosity reduction, matting efficiency and storage stability without forming hard sediment.
06.12.2019 – UNIQ®FOAM 155 S
UNIQ®FOAM 155 S – Non-silicone defoamer for solvent- and solvent free systems.
UNIQ®FOAM 155 S is a strong defoamer can be used for all solvent borne and solvent free coating systems, especially suitable for solvent free UV system and epoxy flooring. The additive has an immediate foam-destroying effect with very strong deaeration and does not have influence on the intercoat adhesion. At the same time, this product can improve the leveling performance.The compatibility needs to be checked, especially in clear coats.
16.11.2019 – UNIQ®SPERSE 580 U
UNIQ®SPERSE 580U – Structured Polymer dispersant.
UNIQ®SPERSE 580 U is a wetting and dispersing additive for water-, solvent-based and solvent free applications and is specially developed for the grinding of high channel black pigment to give the highest jetness with strong blue undertone. It is also suited for grinding organic pigment with excellent dispersion stability, viscosity reduction, color development and transparency properties in more difficult pigments like PB15:2 pigment. The dispersant is also well suited for UV application, ink and inkjet.
16.11.2019 – UNIQ®SPERSE 630 U
UNIQ®SPERSE 630U – Structured Polymer dispersant.
UNIQ®SPERSE 630 U is a wetting and dispersing additive for water based applications. Suitable for resin free pigment concentrates, suitable for all pigment. The dispersant stabilizes pigments by means of steric stabilization. Especially developed for the grinding of organic pigment to give excellent transparency, color development, and high Chroma, improved the gloss, and shows good viscosity reduction. As a matter of fact higher pigment loading pigment concentrates can be achieved.
UNIQ®SPERSE 630 U is a wetting and dispersing additive for water based applications. Suitable for resin free pigment concentrates, suitable for all pigment. The dispersant stabilizes pigments by means of steric stabilization. Especially developed for the grinding of organic pigment to give excellent transparency, color development, and high Chroma, improved the gloss, and shows good viscosity reduction. As a matter of fact higher pigment loading pigment concentrates can be achieved.
12.09.2019 – UNIQ®SPERSE 680 U
UNIQ®SPERSE 680U – Structured Polymer dispersant.
UNIQ®SPERSE 680 U is a wetting and dispersing additive for water-, solvent- and solvent free based applications. The dispersant is especially developed for grinding organic pigments, but gives also good performances in jetness for HCC carbon black and inorganic pigments. The dispersant can be used for the preparation of resin free pigment concentrates. Application of use can be liquid colorants based on plasticizers, resin free water-based colorants, solvent based colorants, UV coatings and other solvent free coating applications. The Dispersant gives excellent color development with high chroma and hue values combined with excellent viscosity reductions.
21.08.2018 – UNIQ®FOAM P-555
UNIQ®FOAM P-555 – Silicone free defoamer for solvent-based and solvent-free applications
UNIQ®FOAM P-555 is a silicone free s a silicone free strong anti-foam and air-release agent especially suitable for ambient-curing plastic systems, adhesives and sealants. Especially suitable for unsaturated polyesters like in car putties
21.06.2018 – UNIQ®FOAM 132S
UNIQ®FOAM 132S – Excellent defoamer performance especially for micro-foam, suitable for clear coat
UNIQ®FOAM 132S is medium to strong defoamer to be used in clear coatings as well suitable for pigmented coating systems. Due the chemical structure the product will not cause turbidity, is easy to handle and mix and will give good air-release and defoaming properties. In addition it will avoid pin-holing and popping. it is also very well suited for UPE primers remaining high clarity and transparency especially for wood coatings.
The product is well suited for spraying applications.
17.06.2018 – UNIQ®FOAM 152S
UNIQ®FOAM 152S – Non-silicone defoamer for solvent free system.
UNIQ®FOAM 152S is a silicone free solvent free strong defoamer can be used for all solvent borne and solvent free coating systems, especially suitable for solvent free epoxy, Solvent free 2K PU and UV system, but also suited like in coil coatings. The additive is intended to be used for pigmented systems and gives immediate foam-destroying effect with very good deaeration and does not have influence on the intercoat adhesion. UNIQ®FOAM 152S is highly recommended for solvent free Epoxy, 2K PU and UV clear coats.
UNIQ®FOAM 152S is a silicone free solvent free strong defoamer can be used for all solvent borne and solvent free coating systems, especially suitable for solvent free epoxy, Solvent free 2K PU and UV system, but also suited like in coil coatings. The additive is intended to be used for pigmented systems and gives immediate foam-destroying effect with very good deaeration and does not have influence on the intercoat adhesion. UNIQ®FOAM 152S is highly recommended for solvent free Epoxy, 2K PU and UV clear coats.
15.05.2018 – UNIQ®FLOW 384S
UNIQ®FLOW 384S – – Cost effect acrylic leveling agent with air-release properties
UNIQ®FLOW 384 S is a cost effective acrylic leveling agent for solvent based and solvent free coating systems showing excellent defoaming combined with leveling performances. It is non-silicone and therefore will not cause intercoat adhesion problems. It is heat stable and therefore suitable for high temperature baking system. The compatibility needs to be checked, especially in clear coats before using.
UNIQ®FLOW 384 S is a cost effective acrylic leveling agent for solvent based and solvent free coating systems showing excellent defoaming combined with leveling performances. It is non-silicone and therefore will not cause intercoat adhesion problems. It is heat stable and therefore suitable for high temperature baking system. The compatibility needs to be checked, especially in clear coats before using.
04.05.2018 – UNIQ®FOAM 245 S
UNIQ®FOAM 245S – – Solvent based strong silicone defoamer
UNIQ®FOAM 245 S is specially developed as a silicone free wetting and leveling agent, based on a fluor modified compound. The product offers very strong surface tension reduction what offer huge benefits compared to traditional wetting agents like short chain polysiloxanes, fluor chemistry and acetylene chemistry, it will not stabilize foam. As matter of fact it gives defoaming performances, combined with fast wetting, anti-cratering and fast leveling performances. Due to the fact that the product is silicone free it is also excellent suitable for automotive and refinish applications.
UNIQ®FOAM 245S – – Solvent based strong silicone defoamer
UNIQ®FOAM 245 S is specially developed as a silicone free wetting and leveling agent, based on a fluor modified compound. The product offers very strong surface tension reduction what offer huge benefits compared to traditional wetting agents like short chain polysiloxanes, fluor chemistry and acetylene chemistry, it will not stabilize foam. As matter of fact it gives defoaming performances, combined with fast wetting, anti-cratering and fast leveling performances. Due to the fact that the product is silicone free it is also excellent suitable for automotive and refinish applications.
21.08.2017 – UNIQ®SPERSE 730 U
UNIQ®SPERSE 730 U – Cost effect universal dispersant
UNIQ®SPERSE 730U is a wetting and dispersing additive for solvent-, water based and solvent free applications. The dispersant is especially suitable for inorganic pigments especially TiO2, extender pigments and fillers. The mill-base viscosities will be strong reduced so higher pigment loading in the mill base process can be achieved. UNIQ®SPERSE 730 U used in the TiO2 can give good storage ability, increasing hiding power and improving the optical whiteness.
UNIQ®SPERSE 730 U – Cost effect universal dispersant
UNIQ®SPERSE 730U is a wetting and dispersing additive for solvent-, water based and solvent free applications. The dispersant is especially suitable for inorganic pigments especially TiO2, extender pigments and fillers. The mill-base viscosities will be strong reduced so higher pigment loading in the mill base process can be achieved. UNIQ®SPERSE 730 U used in the TiO2 can give good storage ability, increasing hiding power and improving the optical whiteness.
17.02.2017 – UNIQ®FLOW 350 W
UNIQ®FLOW 350 W – Wetting and anti-crater agent for water-, solvent-based and solvent free applications.
UNIQ®FLOW 350 W is specially developed as a silicone free wetting and leveling agent, based on a fluor modified compound. The product offers very strong surface tension reduction what offer huge benefits compared to traditional wetting agents like short chain polysiloxanes, fluor chemistry and acetylene chemistry, it will not stabilize foam. As matter of fact it gives defoaming performances, combined with fast wetting, anti-cratering and fast leveling performances. Due to the fact that the product is silicone free it is also excellent suitable for automotive and refinish applications. Due to the chemical composition, UNIQ®FLOW 350 W offers excellent compatibility and solubility is in nearly all resin system.
UNIQ®FLOW 350 W – Wetting and anti-crater agent for water-, solvent-based and solvent free applications.
UNIQ®FLOW 350 W is specially developed as a silicone free wetting and leveling agent, based on a fluor modified compound. The product offers very strong surface tension reduction what offer huge benefits compared to traditional wetting agents like short chain polysiloxanes, fluor chemistry and acetylene chemistry, it will not stabilize foam. As matter of fact it gives defoaming performances, combined with fast wetting, anti-cratering and fast leveling performances. Due to the fact that the product is silicone free it is also excellent suitable for automotive and refinish applications. Due to the chemical composition, UNIQ®FLOW 350 W offers excellent compatibility and solubility is in nearly all resin system.
24.01.2015 – UNIQ®SPERSE
UNIQ®SPERSE 685 U – Universal wetting and dispersing additive for water-borne, solvent-borne and solvent free coatings.
UNIQ®SPERSE 685 U is an all-round dispersing agent for the stabilization of all kind of pigments including Carbon black. It gives very good viscosity reduction, color development and color strength to the stabilized pigments. Also the compatibility with all resins systems makes the product very well suited for multiple applications. The dispersing agent is also well suited for gel-coats.
UNIQ®SPERSE 685 U is a high-molecular-weight copolymer with pigment affinic groups that can be used in a wide range of water-borne coatings. It can be used for resin free pigment concentrates and as well for directly as supplied in the dispersion process in combination with resins. It can help to avoid for post adding to avoid color floatation.
UNIQ®SPERSE 685 U – Universal wetting and dispersing additive for water-borne, solvent-borne and solvent free coatings.
UNIQ®SPERSE 685 U is an all-round dispersing agent for the stabilization of all kind of pigments including Carbon black. It gives very good viscosity reduction, color development and color strength to the stabilized pigments. Also the compatibility with all resins systems makes the product very well suited for multiple applications. The dispersing agent is also well suited for gel-coats.
UNIQ®SPERSE 685 U is a high-molecular-weight copolymer with pigment affinic groups that can be used in a wide range of water-borne coatings. It can be used for resin free pigment concentrates and as well for directly as supplied in the dispersion process in combination with resins. It can help to avoid for post adding to avoid color floatation.
05.06.2014 – UNIQ®SPERSE 690 W
UNIQ®SPERSE 690 W – Wetting and dispersing additive for water-borne coatings.
UNIQ®SPERSE 690 W is an excellent dispersing agent for the stabilization of all kind of pigments including Carbon black. It gives very good viscosity reduction, color development and color strength to the stabilized pigments. Also the compatibility with all resins for water based makes the product very well suited for multiple applications.
UNIQ®SPERSE 690 W is a high-molecular-weight copolymer with pigment affinic groups that can be used in a wide range of water-borne coatings. It can be used for resin free pigment concentrates and as well for directly as supplied in the dispersion process in combination with resins.
UNIQ®SPERSE 690 W – Wetting and dispersing additive for water-borne coatings.
UNIQ®SPERSE 690 W is an excellent dispersing agent for the stabilization of all kind of pigments including Carbon black. It gives very good viscosity reduction, color development and color strength to the stabilized pigments. Also the compatibility with all resins for water based makes the product very well suited for multiple applications.
UNIQ®SPERSE 690 W is a high-molecular-weight copolymer with pigment affinic groups that can be used in a wide range of water-borne coatings. It can be used for resin free pigment concentrates and as well for directly as supplied in the dispersion process in combination with resins.
15.01.2014 UNIQ®SPERSE 615 S
UNIQ®SPERSE 615 S Wetting and dispersing additive for solvent-borne coatings, printing inks, and inkjet inks to stabilize all pigments and carbon blacks.
UNIQ®SPERSE 615 Sis an exceptionally versatile wetting and dispersing additive that is particularly well suited for the various types of phthalocyanine pigments and carbon blacks.
UNIQ®SPERSE 615 S is a high-molecular-weight copolymer with pigment affinic groups that can be used in a wide range of solvent-borne coatings. It can be used directly as supplied in the dispersion process.
UNIQ®SPERSE 615 S Wetting and dispersing additive for solvent-borne coatings, printing inks, and inkjet inks to stabilize all pigments and carbon blacks.
UNIQ®SPERSE 615 Sis an exceptionally versatile wetting and dispersing additive that is particularly well suited for the various types of phthalocyanine pigments and carbon blacks.
UNIQ®SPERSE 615 S is a high-molecular-weight copolymer with pigment affinic groups that can be used in a wide range of solvent-borne coatings. It can be used directly as supplied in the dispersion process.
